Lotus Equipment Sales Ltd.
120, 5726 Burleigh Cr. S.E.
Calgary, Alberta, Canada
T2H 1Z8
Phone: (403)253-0822   1-800-661-0002
Fax: (403)253-8684   1-800-661-0007
Email: info@lotus-equip.com

Go Back to Main Engine Page

4-12 Horse Power

13-16 Horse Power

17-40 Horse Power

Replacement Engines

 

Note: Items listed here are for reference purposes only, and does not imply

that they are in stock or available at any given time.

4-12 Horse Power Engines

Standard Features, Engine Prices.
CS4 XT173 CS6 CH6 M8 CS8.5 CS10 CH11 CS12 M12

CS Engine Specifications

 

Standard Features
Command Pro CS
4 HP (Horizontal Shaft) Single Cylinder Small Frame

Standard Features:
*Overhead Valve Design
*Electronic Ignition
*Dual Element Air Cleaner with Silenced IntakeC
*Closed Breather System
*Dual Oil Fill Locations
*Slant Cylinder with Cast Iron Liner
*1 (U.S.) Gallon (3.9L) Top Mount Fuel Tank with Strainer and Shut-Off Valve/Filter
*Front Mounted Throttle and Choke Controls, Remote Throttle Capable
*Remote Choke (Electric Start Only)
*Large Capacity Muffler with Guard and Spark Arrestor
*Dual Ball Bearings
*Automatic Compression Release
*Crankshaft-.75" (19.05 mm) Diameter x 2.42" (61.47 mm) PTO length, .19" (4.83 mm) Keyway, Drilled and Tapped, .67" (17.01 mm) Deep, 5/16-24 UNF
*PTO Face - 3.625" (92.08 mm) Diameter Bolt Circle (4 Holes) 5/16-24 UNF-2B Thread x .55" (13.97 mm) Deep
*Colour-Black with Cast Aluminium

4 HP Standard Engines (Horizontal Shaft)

Horsepower:
Series:
Model:
Spec:
Crankshaft:
Weight:
Suggested List:

 4
Command CS Series
CS4T
901501
3/4" Dia. x 2.42" PTO Length .19" Keyway
42 lbs.
Please Call

Standard Features Plus:

 Retractable Start
Horsepower:
Series:
Model:
Spec:
Crankshaft:
Weight:
Suggested List:		 4
Command CS Series
CS4T
901502
3/4" Dia. x 2.42" PTO Length .19" Keyway
42 lbs.
Please Call
Standard Features Plus: Retractable Start, Oil Sentry
Horsepower:
Series:
Model:
Spec:
Crankshaft:
Weight:
Suggested List:		 4
Command CS Series
CS4T
901503
3/4" Dia. x 2.42" PTO Length .19" Keyway
42 lbs.
Please Call
Standard Features Plus:
 Retractable Start, Oil Sentry
Heavy Duty Cyclonic Air Cleaner
Horsepower:
Series:
Model:
Spec:
Crankshaft:
Weight:
Suggested List:		 4
Command CS Series
CS4T
901506
3/4" Dia. x 2.42" PTO Length .19" Keyway
47 lbs.
Please Call

Standard Features Plus:
 Retractable Start, Oil Sentry
7 amp Alternator - Unregulated

4 HP Gear Reduction Engines (Horizontal Shaft)
Horsepower:
Series:
Model:
Spec:
Crankshaft:
Weight:
Suggested List:		 4
Command CS Series
CS4TR
901504
3/4" Dia. x 1.97" PTO Length .19" Keyway
47 lbs.
Please Call

Standard Features Plus:
 Retractable Start, Oil Sentry
6:1 Gear Reduction (3 O'clock)

4 HP Pump Shaft Engines (Horizontal Shaft)
Horsepower:
Series:
Model:
Spec:
Crankshaft:
Weight:
Suggested List:		 4
Command CS Series
CS4TP
901505
Threaded 5/8-18 UNF Diameter x 2.42" PTO Length
42 lbs.
Please Call

Standard Features Plus: Retractable Start, Oil Sentry, Less Remote Throttle
Courage Walk XT-7
4.5 HP (Vertical Shaft) Single Cylinder
Standard Features:
*Cast Iron Cylinder Bore
*Flywheel Ball Bearing
*Forged Crankshaft
*173 cc Displacement
*Net Peak Torque – 7.0 ft, lbs. @ 2600 rpm
*Net Horsepower – 4.5 hp @ 3600 rpm
*Splash Lubrication
*Large Fuel Inlet and Cap
*Large 1.4 Liter Fuel Tank
*Easy Access Extended Yellow Dipstick
*Aluminum Flywheel
*Fixed speed @ 3100
*Ergonomic Recoil Handle
*Internally Vented Carburetor
*Automotive Style Pleated Air Filter
*Flywheel Brake
*Recoil Starter
*Easy Start Primer Bulb
*Electronic Ignition
*Muffler with Guard
*Textured Black Engine Cover and Insert
*Crankshaft-.25 mm Diameter x 3.5/32” PTO length, 1/4" Full Key & 2  #505 Woodruff Slots, Drilled and Tapped,
  3/8-24 UNF
*SAE J609 Mounting Flange E (8” dia. BC)
*EPA Phase II Exhaust Compliant

4.5 HP Standard Engines (Vertical Shaft)

Horsepower:
Series:
Model:
Spec:
Crankshaft:
Weight:
Suggested List:

4.5
Courage XT-7 Series
XT173
XT173-0038
25mm Dia. x 3.5/32” PTO Length
30 lbs.
$

Standard Features Except:

  

Horsepower:
Series:
Model:
Spec:
Crankshaft:
Weight:
Suggested List:

4.5
Courage XT-7 Series
XT173
XT173-0037
.875” Dia. x 3.5/32” PTO Length
30 lbs.
$

Standard Features Except:

Crankshaft – 0.875 Diameter x 3-5/32” PTO Length, 3/16” Keyway, 2 #505 Woodruff Slot, Drilled & Tapped # 3/8”-24 UNF

Horsepower:
Series:
Model:
Spec:
Crankshaft:
Weight:
Suggested List:

4.5
Courage XT-7 Series
XT173
XT173-0011
875” Dia. x 3.5/32” PTO Length
30 lbs.
$

Standard Features Except:

Crankshaft – 0.875 Diameter x 3-5/32” PTO Length, 3/16” Keyway, 1 #505 Woodruff Slot, Drilled & Tapped # 3/8”-24 UNF

Horsepower:
Series:
Model:
Spec:
Crankshaft:
Weight:
Suggested List:

4.5
Courage XT-7 Series
XT173
XT173-0007
.25 mm Diameter x 3.5/32” PTO length
30 lbs.
$

Standard Features Except:

Crankshaft-.25 mm Diameter x 3-5/32” PTO length, 3/16" Full Key 2  #505 Woodruff Slots, Drilled and Tapped,
7/16-20 UNF

Horsepower:
Series:
Model:
Spec:
Crankshaft:
Weight:
Suggested List:

4.5
Courage XT-7 Series
XT173
XT173-0040
875” Dia. x 3-5/32” PTO Length
30 lbs.
$

Standard Features Except:

Crankshaft .875” Dia. x 3.5/32” PTO Length, 3/16" Keyway
2 #505 Woodruff Slots, Drilled and Tapped, 3/8-24 UNF
Manual Choke, Fixed Speed @ 3200 rpm

Horsepower:
Series:
Model:
Spec:
Crankshaft:
Weight:
Suggested List:

4.5
Courage XT-7 Series
XT173
XT173-0035
875” Dia. x 3-5/32” PTO Length
30 lbs.
$

Standard Features Except:

Crankshaft-.875” Diameter x 3-5/32” PTO length, 3/16" Keyway
2  #505 Woodruff Slots, Drilled and Tapped, 3/8-24 UNF
Manual Choke, Variable Speed (1800-3300 rpm)

Horsepower:
Series:
Model:
Spec:
Crankshaft:
Weight:
Suggested List:

4.5
Courage XT-7 Series
XT173
XT173-0036
.25 mm Diameter x 3.5/32” PTO length
30 lbs.
$

Standard Features Except:

Crankshaft-.25 mm Diameter x 3-5/32” PTO length, 1/4" Full Key
2  #505 Woodruff Slots, Drilled and Tapped, 3/8-24 UNF
Manual Choke, Variable Speed (1800-3300 rpm)

Horsepower:
Series:
Model:
Spec:
Crankshaft:
Weight:
Suggested List:

4.5
Courage XT-7 Series
XT173
XT173-0009
875” Dia. x 2-7/16” PTO Length
30 lbs.
$

Standard Features Except:

Crankshaft-.875” Dia. x 2-7/16” PTO Length, 3/16" Keyway
Drilled and Tapped, 3/8-24 UNF
Heavy Weight Cast Iron Flywheel, Fixed Speed @ 3300 rpm,
Ignition Kill Lead with Terminal, No Flywheel Brake

Horsepower:
Series:
Model:
Spec:
Crankshaft:
Weight:
Suggested List:

4.5
Courage XT-7 Series
XT173
XT173-0010
875” Dia. x 2-7/16” PTO Length
30 lbs.
$

Standard Features Except:

Crankshaft-.875” Dia. x 2-7/16” PTO Length, 3/16" Keyway
Drilled and Tapped, 3/8-24 UNF
Heavy Weight Cast Iron Flywheel, Variable Speed (1800-3300 rpm) Manual Choke, Ignition Kill Lead with Terminal,
No Flywheel Brake

Horsepower:
Series:
Model:
Spec:
Crankshaft:
Weight:
Suggested List:

4.5
Courage XT-7 Series
XT173
XT173-0039
875” Dia. x 2-7/16” PTO Length
30 lbs.
$

Standard Features Except:

Crankshaft-.875” Dia. x 2-7/16” PTO Length, 3/16" Keyway
Drilled and Tapped, 3/8-24 UNF
Heavy Weight Cast Iron Flywheel, Fixed Speed @ 3600 rpm Manual Choke, Ignition Kill Lead with Terminal,
No Flywheel Brake
Command Pro
6 HP (Horizontal Shaft) Single Cylinder

Standard Features:
*Overhead Valve Design
*Electronic Ignition
*Dual Element Air Cleaner
*Closed Breather System
*Low Oil Fill Location
*Slant Cylinder with Cast Iron Liner
*.75 (U.S.) Gallon Top Mount Fuel Tank with Integral Fuel Filter
*Automatic Compression Release
*Top Mounted Quiet Muffler with Guard
*Front Mounted Throttle and Choke Controls
*Oil Sentry Shutdown with Warning Light
*Crankshaft-.75" Diameter x 2.43" PTO length, .19" Keyway, Drilled and Tapped, .79" Deep, 5/16-24 UNF
*PTO Face - 3.625" Diameter Bolt Circle (4 Holes), 5/16-24 UNF .51" Deep
*Colour-Black with Cast Aluminium

6 HP Standard Engines (Horizontal Shaft)
Horsepower:
Series:
Model:
Spec:
Crankshaft:
Weight:
Suggested List:		 6
Command CS Series
CS6T
911501
3/4" Dia. x 2.42" PTO Length .19" Keyway
43 lbs.
Please Call
Standard Features Plus: Retractable Start
Horsepower:
Series:
Model:
Spec:
Crankshaft:
Weight:
Suggested List:		 6
Command CS Series
CS6T
911502
3/4" Dia. x 2.42" PTO Length .19" Keyway
43
Please Call
Standard Features Plus: Retractable Start, Oil Sentry
Horsepower:
Series:
Model:
Spec:
Crankshaft:
Weight:
Suggested List:		 6
Command Pro
CH6T
15101
3/4" Dia. x 2.43" PTO Length .19" Keyway
50 lbs.
Please Call
Standard Features Plus: Retractable Start, Oil Sentry
Horsepower:
Series:
Model:
Spec:
Crankshaft:
Weight:
Suggested List:		 6
Command Pro
CH6T
15102
3/4" Dia. x 2.43" PTO Length .19" Keyway
50 lbs.
Please Call
Standard Features Plus: Retractable Start, Oil Sentry, Ball Bearings
Horsepower:
Series:
Model:
Spec:
Crankshaft:
Weight:
Suggested List:		 6
Command CS Series
CS6T
911503
3/4" Dia. x 1.97" PTO Length .19" Keyway
49
Please Call

Standard Features Plus: Retractable Start, Oil Sentry,
Heavy-Duty Cyclonic Air Cleaner
Horsepower:
Series:
Model:
Spec:
Crankshaft:
Weight:
Suggested List:		 6
Command CS Series
CS6T
911507
3/4" Dia. x 2.42" PTO Length .19" Keyway
44
Please Call

Standard Features Plus: Retractable Start, Oil Sentry,
7 amp Alternator-Unregulated
Horsepower:
Series:
Model:
Spec:
Crankshaft:
Weight:
Suggested List:		 6
Command Pro
CH6ST
15103
3/4" Dia. x 2.43" PTO Length .19" Keyway
55 lbs.
Please Call

Standard Features Plus: 12 Volt Electric Start, Retractable Start, Oil Sentry,
1/2 amp Alternator Unregulated, Ball Bearings

6 HP Gear Reduction Engines (Horizontal Shaft)
Horsepower:
Series:
Model:
Spec:
Crankshaft:
Weight:
Suggested List:		 6
Command CS Series
CS6T
911504
3/4" Dia. x 1.97" PTO Length .19" Keyway
49
Please Call

Standard Features Plus: Retractable Start, Oil Sentry
6:1 Gear Reduction (3 O'clock)
6 HP Pump Shaft Engines (Horizontal Shaft)
Horsepower:
Series:
Model:
Spec:
Crankshaft:
Weight:
Suggested List:		 6
Command CS Series
CS6TP
911505
Threaded 5/8-18 UNF, .625 Dia. x 2.42" PTO Length
43
Please Call

Standard Features Plus: Retractable Start, Oil Sentry,
Less Remote Throttle
Horsepower:
Series:
Model:
Spec:
Crankshaft:
Weight:
Suggested List:		 6
Command Pro
CH6PT
15105
Threaded 5/8-16 UNF, .625 Dia. x 2.43" PTO Length
44
Please Call

Standard Features Plus: Retractable Start, Oil Sentry, Ball Bearings

6 HP Generator / Welder Engines (Horizontal Shaft)
Horsepower:
Series:
Model:
Spec:
Crankshaft:

Weight:
Suggested List:		 6
Command Pro
CH6GT
15104
2.25" Per Foot Taper, .75" Dia. x 2.83" PTO Length Drilled & Tapped .79" Deep, 5/16-24 UNF
44
Please Call

Standard Features Plus: Retractable Start, Oil Sentry, Ball Bearings, Constant-Speed @ 3750 RPM (Replaces Standard Throttle Control), 5% Governor Regulation

6 HP Blower / Vac Engines (Horizontal Shaft)
Horsepower:
Series:
Model:
Spec:
Crankshaft:

Weight:
Suggested List:		 6
Command Pro
CH6T
15106
1" Dia. x 3" PTO Length .25" Keyway, Drilled & Tapped 1.5" Deep, 7/16-20 UNF
50
Please Call

Standard Features Plus: Retractable Start, Oil Sentry, Ball Bearings

6 HP Go Kart Engines (Horizontal Shaft)
Horsepower:
Series:
Model:
Spec:
Crankshaft:
Weight:
Suggested List:		 6
Command Pro
CH6T
15132
3/4" Dia. x 2.42" PTO Length .19" Keyway
48
Please Call

Standard Features Plus: Special Modifications for Go Kart Racing,
Less Fuel Tank, Less Exhaust, Special Racing Cam,
Retractable Start
Magnum
8 HP (Horizontal Shaft) Single Cylinder

Standard Features:
*Emissions Compliant
*Electronic Ignition
*High Clearance Baffling
*Closed Breather System
*Stellite Exhaust Valve, with Seat Insert and Rotator
*Ball Bearings Both Ends
*Steel Intake Valve
*Cast Iron Cylinder
*Dual Element Air Cleaner
*Convenient Oil Fill/Dipstick
*Louvered "Pancake" Muffler
*In-Line Fuel Filter
*1-1/4 Gallon Side-Mounted Fuel Tank
*Mechanical Fuel Pump
*Variable Speed Governor
*Dual Drain Cast Iron oil Pan Adaptable for Oil Sentry
*Automatic Compression Release
*Engine Mounted Throttle and Choke Controls
*Crankshaft-1" Diameter x 3-1/4" PTO length, 1/4" Keyway, Drilled and Tapped, 1-1/2" Deep, 7/16-20 UNF
*PTO Face - 5" Diameter (4 Holes), 5/16-18 UNF x 1/2" Deep, 6-1/2" Diameter (4 Holes), 3/8-16 x 11/16" Deep, 5 3/4" Diameter Pilot
*Colour-Black

8 HP Standard Engines (Horizontal Shaft)
Horsepower:
Series:
Model:
Spec:
Crankshaft:
Weight:
Suggested List:		 8
Magnum
M8T
301642
1" Dia. x 3.25" PTO Length .25" Keyway
79 lbs.
Please Call
Standard Features Plus: Retractable Start
Horsepower:
Series:
Model:
Spec:
Crankshaft:
Weight:
Suggested List:		 8
Magnum
M8S
301643
1" Dia. x 3.25" PTO Length .25" Keyway
88 lbs.
Please Call
Standard Features Plus: 12 Volt Electric Start, 15 amp Alternator, Key Switch
Horsepower:
Series:
Model:
Spec:
Crankshaft:
Weight:
Suggested List:		 8
Magnum
M8ST
301644
1" Dia. x 3.25" PTO Length .25" Keyway
88 lbs.
Please Call
Standard Features Plus: 12 Volt Electric Start, 15 amp Alternator, Key Switch, Retractable Start

8 HP Gear Reduction Engines (Horizontal Shaft)
Horsepower:
Series:
Model:
Spec:
Crankshaft:
Weight:
Suggested List:		 8
Magnum
M8RT
301645
1" Dia. x 3.25" PTO Length .25" Keyway
98 lbs.
Please Call

Standard Features Plus:  
Horsepower:
Series:
Model:
Spec:
Crankshaft:
Weight:
Suggested List:		 8
Magnum
M8RS
301646
1" Dia. x 3.25" PTO Length .25" Keyway
107 lbs.
Please Call

Standard Features Plus: 12 Volt Electric Starter, 15 amp Alternator, Key Switch
6:1 Gear Reduction (9 O'clock)
Command Pro CS
8.5 HP (Horizontal Shaft) Single Cylinder Mid-Frame

Standard Features:
*Overhead Valve Design
*Electronic Ignition
*Dual Element Air Cleaner with Silenced Intake
*Closed Breather System
*Dual Oil Fill Locations and Drain
*Oil Sentry
*Slant Cylinder with Cast Iron Liner
*1.6 (U.S.) Gallon (6L) Top Mount Fuel Tank with Strainer and Shut-Off Valve/Filter
*Front Mounted Throttle and Choke Controls, Remote Throttle Capable
*Large Capacity Muffler with Guard and Spark Arrestor
*Dual Ball Bearings
*Automatic Compression Release
*Crankshaft-1" (25.4 mm) Diameter x 3.48" (88.39 mm) PTO length, .25" (6.35 mm) Keyway, Drilled and Tapped, 1.1" (27.94 mm) Deep, 7/16-20 UNF
*PTO Face - 6.5" (165.1 mm) Diameter Bolt Circle (4 Holes) 3/8-16 UNC x .71" (18.03 mm) Deep and 5" (127 mm) Diameter
*Bolt Circle (4 Holes) 5/16-24 UNF 2B Tap x .71" (18.03 mm) Dee
*5.75" (146.05 mm) Diameter Pilot
*Colour-Black with Cast Aluminium

8.5 HP Standard Engines (Horizontal Shaft)
Horsepower:
Series:
Model:
Spec:
Crankshaft:
Weight:
Suggested List:		 8.5
Command CS Series
Model: CS8.5T
951500
1" Dia. x 3.48" PTO Length .25" Keyway
62 lbs.
Please Call

Standard Features Plus: Retractable Start, Rotating Metal Grass Screen,  Oil Sentry
Horsepower:
Series:
Model:
Spec:
Crankshaft:
Weight:
Suggested List:		 8.5
Command CS Series
Model: CS8.5T
951501
1" Dia. x 3.48" PTO Length .25" Keyway
64 lbs.
Please Call

Standard Features Plus: Retractable Start, Balance Shaft,
Rotating Metal Grass Screen, Oil Sentry
Horsepower:
Series:
Model:
Spec:
Crankshaft:
Weight:
Suggested List:		 8.5
Command CS Series
Model: CS8.5T
951502
1" Dia. x 3.48" PTO Length .25" Keyway
60 lbs.
Please Call

Standard Features Plus: Retractable Start, Balance Shaft,
Heavy-Duty Cyclonic Air Cleaner, Oil Sentry
Horsepower:
Series:
Model:
Spec:
Crankshaft:
Weight:
Suggested List:		 8.5
Command CS Series
Model: CS8.5T
951510
1" Dia. x 3.48" PTO Length .25" Keyway
62 lbs.
Please Call

Standard Features Plus: Retractable Start, Balance Shaft,
18 amp Alternator, Rectified, Oil Sentry
Horsepower:
Series:
Model:
Spec:
Crankshaft:
Weight:
Suggested List:		 8.5
Command CS Series
Model: CS8.5ST
951508
1" Dia. x 3.48" PTO Length .25" Keyway
75 lbs.
Please Call

Standard Features Plus: Retractable Start, 12 Volt Electric Start-Solenoid Shift 3 amp Alternator, Rectified, Balance Shaft,  Remote Choke, Oil Sentry
Horsepower:
Series:
Model:
Spec:
Crankshaft:
Weight:
Suggested List:		 8.5
Command CS Series
Model: CS8.5ST
951512
1" Dia. x 3.48" PTO Length .25" Keyway
75 lbs.
Please Call

Standard Features Plus: Retractable Start, 12 Volt Electric Start-Solenoid Shift 18 amp Regulated, Balance Shaft, Remote Choke, Oil Sentry
Horsepower:
Series:
Model:
Spec:
Crankshaft:
Weight:
Suggested List:		 8.5
Command CS Series
Model: CS8.5T
951509
1" Dia. x 3.48" PTO Length .25" Keyway
75 lbs.
Please Call

Standard Features Plus: Retractable Start, Less Oil Sentry Light,  Plate Compactor Ready

8.5 HP Gear Reduction Engines (Horizontal Shaft)
Horsepower:
Series:
Model:
Spec:
Crankshaft:
Weight:
Suggested List:		 8.5
Command CS Series
Model: CS8.5TR
951504
1" Dia. x 3.3" PTO Length .25" Keyway
68 lbs.
Please Call

Standard Features Plus: Retractable Start, 6:1 Gear Reduction (3 O'clock), Balance Shaft, 
Oil Sentry
Horsepower:
Series:
Model:
Spec:
Crankshaft:
Weight:
Suggested List:		 8.5
Command CS Series
Model: CS8.5TR
951505
.98" Dia. x 2.52" PTO Length .25" Keyway
66 lbs.
Please Call

Standard Features Plus: Retractable Start, 2:1 Gear Reduction (3 O'clock),  Oil Sentry

8.5 HP Pump Shaft Engines (Horizontal Shaft)
Horsepower:
Series:
Model:
Spec:
Crankshaft:
Weight:
Suggested List:		 8.5
Command CS Series
Model: CS8.5TP
951503
Threaded 1-14 UNF, 1" Diameter x 3.5" PTO Length
64 lbs.
Please Call

Standard Features Plus: Retractable Start, Balance Shaft, Oil Sentry

8.5 HP Generator Shaft Engines (Horizontal Shaft)
Horsepower:
Series:
Model:
Spec:
Crankshaft:

Weight:
Suggested List:		 8.5
Command CS Series
CS8.5TG
951506
2.25" Per Foot Taper, 1" Dia. x 4.33" PTO Length, Drilled & Tapped .71" Deep, 5/16-24 UNF
63
Please Call

Standard Features Plus: Retractable Start, Less Remote Throttle,5% Governor/60 Hertz, 
Oil Sentry
Horsepower:
Series:
Model:
Spec:
Crankshaft:

Weight:
Suggested List:		 8.5
Command CS Series
CS8.5TG
951507
2.25" Per Foot Taper, 1" Dia. x 4.33" PTO Length, Drilled & Tapped .71" Deep, 5/16-24 UNF
57
Please Call

Standard Features Plus: Retractable Start, Less Remote Throttle,  5% Governor/60 Hertz, 
Low Profile Air Cleaner, Less Fuel Tank & Muffler (muffler gasket shipped loose), Oil Sentry
Horsepower:
Series:
Model:
Spec:
Crankshaft:

Weight:
Suggested List:		 8.5
Command CS Series
CS8.5TG
951511
2.25" Per Foot Taper, 1" Dia. x 4.33" PTO Length, Drilled & Tapped .71" Deep, 5/16-24 UNF
57
Please Call

Standard Features Plus: Retractable Start, Less Remote Throttle,
5% Governor/50 Hertz, Oil Sentry
Command Pro CS
10  HP (Horizontal Shaft) Single Cylinder Large Frame

Standard Features:
*Overhead Valve Design
*Electronic Ignition
*Dual Element Air Cleaner with Silenced Intake
*Closed Breather System
*Dual Oil Fill Locations
*Oil Sentry
*Slant Cylinder with Cast Iron Liner
*1.8 Gallon (6.9L) Top Mount Fuel Tank with Strainer and Shut-Off Valve/Filter
*Front Mounted Throttle and Choke Controls, Remote Throttle Capable
*Remote Choke (Electric Start Only)
*Large Capacity Muffler with Guard and Spark Arrestor
*Dual Ball Bearings
*Separate Balance Shaft
*Automatic Compression Release
*Crankshaft-1" (25.4 mm) Diameter x 3.48" (88.39 mm) PTO length, .25" (6.35 mm) Keyway, Drilled and Tapped, 1.1" (27.94 mm) Deep, 3/8-24 UNF
*PTO Face - 6.5" (165.1 mm) Diameter Bolt Circle (4 Holes) 3/8-16 UNC x .71" (18.03 mm) Deep and 5" (127 mm) Diameter
*Bolt Circle (4 Holes) 5/16-24 UNF 2B Tap x .71" (18.03 mm) Deep 5.75" (146.05 mm) Diameter Pilot
*Colour-Black with Cast Aluminium

10 HP Standard Engines (Horizontal Shaft)
Horsepower:
Series:
Model:
Spec:
Crankshaft:
Weight:
Suggested List:		 10
Command CS Series
Model: CS10T
931501
1" Dia. x 3.48" PTO Length .25" Keyway
80 lbs.
Please Call

Standard Features Plus: Retractable Start, Rotating Metal Grass Screen,  Oil Sentry
Horsepower:
Series:
Model:
Spec:
Crankshaft:
Weight:
Suggested List:		 10
Command CS Series
Model: CS10T
931502
1" Dia. x 3.48" PTO Length .25" Keyway
80 lbs.
Please Call
Standard Features Plus: Retractable Start, Heavy Duty Cyclonic Air Cleaner,  Oil Sentry
Horsepower:
Series:
Model:
Spec:
Crankshaft:
Weight:
Suggested List:		 10
Command CS Series
Model: CS10S
931509
1" Dia. x 3.48" PTO Length .25" Keyway
88 lbs.
Please Call
Standard Features Plus: 12 Volt Electric Start, 10 amp Alternator, Regulated, Oil Sentry
Horsepower:
Series:
Model:
Spec:
Crankshaft:
Weight:
Suggested List:		 10
Command CS Series
Model: CS10ST
931508
1" Dia. x 3.48" PTO Length .25" Keyway
88 lbs.
Please Call
Standard Features Plus: Retractable Start, 12 Volt Electric Start,
10 amp Alternator, Regulated, Oil Sentry
Horsepower:
Series:
Model:
Spec:
Crankshaft:
Weight:
Suggested List:		 10
Command CS Series
Model: CS10ST
931510
1" Dia. x 3.48" PTO Length .25" Keyway
88 lbs.
Please Call
Standard Features Plus: Retractable Start, 12 Volt Electric Start,
18 amp Alternator, Regulated, Oil Sentry

10 HP Gear Reduction Engines (Horizontal Shaft)
Horsepower:
Series:
Model:
Spec:
Crankshaft:
Weight:
Suggested List:		 10
Command CS Series
Model: CS10TR
931505
1" Dia. x 3.3" PTO Length .25" Keyway
88 lbs.
Please Call
Standard Features Plus: Retractable Start, 6:1 Gear Reduction (3 O'clock),  Oil Sentry
Horsepower:
Series:
Model:
Spec:
Crankshaft:
Weight:
Suggested List:		 10
Command CS Series
Model: CS10TR
931506
.98" Dia. x 2.36" PTO Length Tapped M8 x 1.25
87 lbs.
Please Call
Standard Features Plus: Retractable Start, 2:1 Gear Reduction (3 O'clock),  Oil Sentry

10 HP Pump Shaft Engines (Horizontal Shaft)
Horsepower:
Series:
Model:
Spec:
Crankshaft:
Weight:
Suggested List:		 10
Command CS Series
Model: CS10S
931504
Threaded 1-14 UNF, 1" Dia. x 3.5" PTO Length
80 lbs.
Please Call

Standard Features Plus: Retractable Start, Less Remote Throttle, Oil Sentry

10 HP Generator Shaft Engines (Horizontal Shaft)
Horsepower:
Series:
Model:
Spec:
Crankshaft:

Weight:
Suggested List:		 10
Command CS Series
Model: CS10TG
931503
2.25" Per Foot Taper, 1" Dia. x 4.33" PTO Length, Drilled & Tapped .71" Deep, 5/16-24 UNF
80
Please Call

Standard Features Plus: Retractable Start, Less Remote Throttle,
5% Governor/60 Hertz, Oil Sentry
Horsepower:
Series:
Model:
Spec:
Crankshaft:

Weight:
Suggested List:		 10
Command CS Series
Model: CS10STG
931507
2.25" Per Foot Taper, 1" Dia. x 4.33" PTO Length, Drilled & Tapped .71" Deep, 5/16-24 UNF
88 lbs.
Please Call

Standard Features Plus: Retractable Start, 12 Volt Electric Start,
10 amp Alternator, Regulated, Less Remote Throttle, 
5% Governor/60 Hertz, Oil Sentry
Command Pro
11 HP (Horizontal Shaft) Single Cylinder

Standard Features:
*Smart-Choke Carburetor
*Hydraulic Valve Lifters
*Dual Element Air Cleaner
*Large Capacity Oil Filter
*Convenient Oil Fill/Dipstick-Yellow
*Automatic Compression Release
*Overhead Valve Design
*Electronic Ignition
*Full Pressure Lubrication
*Dual Oil Drain
*Stellite Exhaust Valve
*1-1/4 Gallon Fuel Tank
*Cast Iron Cylinder Liner
*Engine Mounted Controls
*Variable Speed Governor
*Steel Intake Valve
*Mechanical Fuel Pump
*Balance System
*Accessory Power Lead ("S" Models)
*Large Capacity In-Line Fuel Filter
*5.75" (146.05 mm) Diameter Pilot
*Crankshaft-1" (25.4) Diameter x 3.49" (89 mm) PTO length, .25" (6mm) Keyway, Drilled and Tapped, 1.5" (38 mm) Deep, 7/16-20 UNF
*PTO Face - 5" (19 mm) Diameter (4 Holes), 5/16-24 x .67" (17 mm) Deep,
*6.5" (165 mm) Diameter 3/8-16 x .83" (21 mm) Deep, 7.75" (197 mm) Diameter (4 Holes) 7/16 x .83" Deep
*Colour-Black with Cast Aluminium

11 HP Standard Engines (Horizontal Shaft)
Horsepower:
Series:
Model:
Spec:
Crankshaft:
Weight:
Suggested List:		 11
Command Pro
CH11T
16101
1" Dia. x 3.49" PTO Length .25" Keyway
95 lbs.
Please Call
Standard Features Plus: Retractable Start
Horsepower:
Series:
Model:
Spec:
Crankshaft:
Weight:
Suggested List:		 11
Command Pro
CH11S
16102
1" Dia. x 3.49" PTO Length .25" Keyway
100 lbs.
Please Call
Standard Features Plus: 12 Volt Electric Start-Engine Mountd Solenoid,
15 amp Alternator, Regulated, Key Switch,
Oil Sentry Shutdown, Easy Start By-Pass Switch
Horsepower:
Series:
Model:
Spec:
Crankshaft:
Weight:
Suggested List:		 11
Command Pro
CH11ST
16103
1" Dia. x 3.49" PTO Length .25" Keyway
102 lbs.
Please Call
Standard Features Plus: Retractable Start,  12 Volt Electric Start-Engine Mounted Solenoid,
15 amp Alternator, Regulated, Key Switch,
Oil Sentry Shutdown, Easy Start By-Pass Switch

11 HP Pump Shaft Engines (Horizontal Shaft)
Horsepower:
Series:
Model:
Spec:
Crankshaft:
Weight:
Suggested List:		 11
Command Pro
CH11PT
16107
Threaded 1-14 UNS, 1" Dia. x 3.49" PTO Length
95 lbs.
Please Call

Standard Features Plus: Retractable Start, Constant Speed Governor,
5.75" Diameter Pilot

11 HP Generator Shaft Engines (Horizontal Shaft)
Horsepower:
Series:
Model:
Spec:
Crankshaft:

Weight:
Suggested List:		 11
Command Pro
CH11GT
16104
2.25" Per Foot Taper, 1" Dia. x 4.34" PTO Length Drilled & Tapped .65" Deep, 5/16-24 UNF
95 lbs.
Please Call

Standard Features Plus: Retractable Start,
Constant Speed @3750 RPM (50 Hertz),
5% Governor Regulation, 5.75" Diameter Pilot
Horsepower:
Series:
Model:
Spec:
Crankshaft:

Weight:
Suggested List:		 11
Command Pro
CH11GS
16105
2.25" Per Foot Taper, 1" Dia. x 4.34" PTO Length
Drilled & Tapped .65" Deep, 5/16-24 UNF
100 lbs.
Please Call

Standard Features Plus: 12 Volt Electric Start-Engine Mounted Solenoid,
15 amp Alternator, Regulated,
Constant Speed @3750 RPM (60 Hertz),
5% Governor Regulation, 5.75" Diameter Pilot
Horsepower:
Series:
Model:
Spec:
Crankshaft:

Weight:
Suggested List:		 11
Command Pro
CH11GT
16118
2.25" Per Foot Taper, 1" Dia. x 4.34" PTO Length
Drilled & Tapped .65" Deep, 5/16-24 UNF
100 lbs.
Please Call

Standard Features Plus: 12 Volt Electric Start-Engine Mounted Solenoid,
15 amp Alternator, Regulated,
Constant Speed @3150 RPM (50 Hertz),
5% Governor Regulation, 5.75" Diameter Pilot
Command Pro CS
12 HP (Horizontal Shaft) Single Cylinder Large Frame

Standard Features:
*Overhead Valve Design
*Electronic Ignition
*Dual Element Air Cleaner with Silenced Intake
*Closed Breather System
*Dual Oil Fill Locations
*Oil Sentry
*Slant Cylinder with Cast Iron Liner
*1.8 Gallon (6.9L) Top Mount Fuel Tank with Strainer and Shut-Off Valve/Filter
*Front Mounted Throttle and Choke Controls, Remote Throttle Capable
*Remote Choke (Electric Start Only)
*Large Capacity Muffler with Guard and Spark Arrestor
*Dual Ball Bearings
*Separate Balance Shaft
*Automatic Compression Release
*Crankshaft-1" (25.4 mm) Diameter x 3.48" (88.39 mm) PTO length, .25" (6.35 mm) Keyway, Drilled and Tapped, 1.1" (27.94 mm) Deep, 3/8-24 UNF
*PTO Face - 6.5" (165.1 mm) Diameter Bolt Circle (4 Holes) 3/8-16 UNC x .71" (18.03 mm) Deep and 5" (127 mm) Diameter
*Bolt Circle (4 Holes) 5/16-24 UNF 2B Tap x .71" (18.03 mm) Deep 5.75" (146.05 mm) Diameter Pilot
*Colour-Black with Cast Aluminium
Magnum
12 HP (Horizontal Shaft) Single Cylinder

Standard Features:
*Emissions Compliant
*Electronic Ignition
*Cast Iron Cylinder
*Dual Element Air Cleaner
*Convenient Oil Fill/Dipstick
*"Pepperpot" Muffler
*High Clearance Baffling
*Closed Breather Baffling
*Stellite Exhaust Valve, with Seat Insert and Rotator
*Ball Bearings Both Ends
*Steel Intake Valve
*In-Line Fuel Filter
*1-1/2 Gallon Side-Mounted Fuel Tank
*Mechanical Fuel Pump
*Variable Speed Governor
*Dual Drain Cast Iron oil Pan Adaptable for Oil Sentry
*Automatic Compression Release
*Engine Mounted Throttle and Choke Controls
*Crankshaft-1-1/8" Diameter x 3-25/32" PTO length, 1/4" Keyway, Drilled and Tapped, 1-1/2" Deep, 7/16-20 UNF
*PTO Face - 5-5/8" Diameter Bolt Circle (4 Holes), 3/8-16 x 13/16" Deep, 7-3/4" Diameter (4 Holes), 7/16-14 x 31/32" Deep
*7" Diameter Pilot
*Colour-Black

12 HP Standard Engines (Horizontal Shaft)
Horsepower:
Series:
Model:
Spec:
Crankshaft:
Weight:
Suggested List:		 12
Command CS Series
Model: CS12T
941501
1" Dia. x 3.48" PTO Length .25" Keyway
80 lbs.
Please Call

Standard Features Plus: Retractable Start, Rotating Metal Grass Screen,  Oil Sentry
Horsepower:
Series:
Model:
Spec:
Crankshaft:
Weight:
Suggested List:		 12
Magnum
Model: M12T
471594
1-1/8" Dia. x 3.78" PTO Length .25" Keyway
141 lbs.
Please Call

Standard Features Plus: Retractable Start
Horsepower:
Series:
Model:
Spec:
Crankshaft:
Weight:
Suggested List:		 12
Command CS Series
Model: CS12T
941502
1" Dia. x 3.48" PTO Length .25" Keyway
80 lbs.
Please Call

Standard Features Plus: Retractable Start, Heavy Duty Cyclonic Air Cleaner,  Oil Sentry
Horsepower:
Series:
Model:
Spec:
Crankshaft:
Weight:
Suggested List:		 12
Magnum
Model: M12S
471595
1-1/8" Dia. x 3.78" PTO Length .25" Keyway
142 lbs.
Please Call

Standard Features Plus: 12 Volt Electric Start, 15 amp Alternator, Key Switch
Horsepower:
Series:
Model:
Spec:
Crankshaft:
Weight:
Suggested List:		 12
Command CS Series
Model: CS12S
941509
1" Dia. x 3.48" PTO Length .25" Keyway
88 lbs.
Please Call

Standard Features Plus: 12 Volt Electric Start, 10 amp Alternator, Regulated, Oil Sentry
Horsepower:
Series:
Model:
Spec:
Crankshaft:
Weight:
Suggested List:		 12
Magnum
M12ST
471596
1-1/8" Dia. x 3.78" PTO Length .25" Keyway
150 lbs.
Please Call

Standard Features Plus: Retractable Start, 12 Volt Electric Start, 15 amp Alternator, Key Switch
Horsepower:
Series:
Model:
Spec:
Crankshaft:
Weight:
Suggested List:		 12
Command CS Series
Model: CS12ST
941508
1" Dia. x 3.48" PTO Length .25" Keyway
88 lbs.
Please Call

Standard Features Plus: Retractable Start, 12 Volt Electric Start,
10 amp Alternator, Regulated, Oil Sentry
Horsepower:
Series:
Model:
Spec:
Crankshaft:
Weight:
Suggested List:		 12
Command CS Series
Model CS12ST
941510
1" Dia. x 3.48" PTO Length .25" Keyway
88 lbs.
Please Call

Standard Features Plus: Retractable Start, 12 Volt Electric Start,
18 amp Alternator, Regulated, Oil Sentry

12 HP Gear Reduction Engines (Horizontal Shaft)
Horsepower:
Series:
Model:
Spec:
Crankshaft:
Weight:
Suggested List:		 12
Command CS Series
Model: CS12TR
941505
1" Dia. x 3.3" PTO Length .25" Keyway
88 lbs.
Please Call

Standard Features Plus: Retractable Start, 6:1 Gear Reduction (3 O'clock),  Oil Sentry
Horsepower:
Series:
Model:
Spec:
Crankshaft:
Weight:
Suggested List:		 12
Command CS Series
Model: CS12TR
941506
.98" Dia. x 2.36" PTO Length Tapped M8 x 1.25
87 lbs. 
Please Call

Standard Features Plus: Retractable Start, 2:1 Gear Reduction (3 O'clock), Oil Sentry

12 HP Pump Shaft Engines (Horizontal Shaft)
Horsepower:
Series:
Model:
Spec:
Crankshaft:
Weight:
Suggested List:		 12
Command CS Series
Model: CS12S
941504
Threaded 1-14 UNF, 1" Dia. x 3.5" PTO Length
80 lbs.
Please Call

Standard Features Plus: Retractable Start, Less Remote Throttle, Oil Sentry

12 HP Generator Shaft Engines (Horizontal Shaft)
Horsepower:
Series:
Model:
Spec:
Crankshaft:

Weight:
Suggested List:		 12
Command CS Series
Model: CS12TG
941503
2.25" Per Foot Taper, 1" Dia. x 4.33" PTO Length, Drilled & Tapped .71" Deep, 5/16-24 UNF
80
Please Call

Standard Features Plus: Retractable Start, Less Remote Throttle,
5% Governor/60 Hertz, Oil Sentry
Horsepower:
Series:
Model:
Spec:
Crankshaft:

Weight:
Suggested List:		 12
Command CS Series
Model: CS12STG
941507
2.25" Per Foot Taper, 1" Dia. x 4.33" PTO Length, Drilled & Tapped .71" Deep, 5/16-24 UNF
88 lbs.
Please Call

Standard Features Plus: Retractable Start, 12 Volt Electric Start,  10 amp Alternator, Regulated, Less Remote Throttle, 5% Governor/60 Hertz, Oil Sentry

50 Hertz Versions Also Available

CS Series Specifications

ENGINE TYPE Four-cycle, single cylinder, slant cylinder, overhead valve, air-cooled, gasoline, horizontal shaft, aluminum head and crankcase with cast-iron cylinder liner.
MODEL: CS4 CS6 CS8.5 CS10 CS12.5
Power @ 3800 RPM* hp (kW)
 4 (2.98)
 6 (4.47)
 8.5 (6.34)
 10 (7.46)
 12 (8.95)
Displacement cu. in. (cc) 7.63 (125) 10.68 (175) 15.25 (250) 18.3 (300) 21.96 (360)
Bore in. (mm) 2.2 (56) 2.59 (66) 2.95 (75) 3.07 (78) 3.35 (85)
Stroke in. (mm) 1.97 (50) 1.97 (50) 2.24 (57) 2.48 (63) 2.48 (63)
Max. Torque lbs. ft. (Nm) 5.5 (7.46)
@2600 RPM		 8.1 (10.98)
@2400 RPM		 12.2 (16.54)
@2400 RPM		 14.7 (19.93)
@2400 RPM		 18.4 (24.95)
@2400 RPM
Compression Ratio 8.3:1 8.5:1 8.3:1 8.1:1 8.1:1
Dry Weight lbs. (kg) 35.2 (15.97) 35.2 (15.97) 58 (26.31) 70.5 (31.98) 70.5 (31.98)
Oil Capacity U.S. Pints (Liters) 1.27 (.6) 1.27 (.6) 2.1 (1) 2.1 (1) 2.1 (1)
Fuel Capacity U.S. quarts (Liters) 4.1 (3.9) 4.1 (3.9) 6.3 (6) 7.3 (6.9) 7.3 (6.9)
Lubrication Splash Splash Splash Splash Splash
Dimensions**


 in. (mm)
Length
Width
Height
10.24 (260)
15.12 (384)
14.69 (373)
10.24 (260)
15.12 (384)
14.69 (373)
11.48 (291.5)
16.97 (431)
16.85 (428)
12.95 (329)
18.14 (460)
17.92 (455)
12.95 (329)
18.14 (460)
17.92 (455)
*Horsepower ratings (show n as gross) are in accordance with Society of Automotive Engineers Small Test Code J1995. Actual engine horsepower is affected by, but not limited to, accessories (air cleaner, exhaust, charging, cooling, fuel pump, etc), application, engine speed and ambient operating conditions (temperature, humidity, and altitude).  For more information, contact Kohler Co. Engine Engineering Department. Kohler Co. reserves the right to change product specifications, designs and standard equipment without notice and without incurring obligation.
** Length is to PTO mounting face, including recoil starter.  Width on CS10 and CS12 is with recoil starter.  Add 0.71" (18mm) for electric starter.

STANDARD FEATURES (BASIC ENGINES)
*OHV slant-cylinder
*Large-capacity fuel tank
w/shut off and dual filter
*Swirl induction combustion chamber
*Electronic ignition
*Oversized mufflers w/arrestor
and guard
*EPA & CARB emission certified
*Steel fuel cap		 *Meet EEC and Canadian RFI standards
*Easy-access throttle,
choke and shutoff
*Increased displacements
*Balance shaft (8.5-12HP)
*Automatic compression release
*Mechanical governor
*Sound-deadening alloy crankcase
*Radiant cylinder sleeve (12HP)
*Dual main ball bearings
*Steel-forged crankshaft
*Carburetor bowl drain
*Dual oil drain and fill
*Metal grass screen
(recoil 8.5-12 HP)
 *Dipstick on starter side
*Oil Sentry
*Stellite faced valves and
Tufftide coated stems
*Dual-element air cleaner
*High-inertia flywheel
*Silenced air intake
*Cast iron cylinder liner
*Recoil Start

POPULAR FACTORY OPTIONS
*2:1 or 6:1 gear reduction
*Electric start (solenoid shift
8.5, 10, 12
*Exhaust deflectors		 *High-output charging systems
*Crankshaft / PTO variations
*Heavy-duty, cyclonic air cleaner
 *Low profile air cleaner
*Fuel economy idle system
(10-12 HP)
 *Dipstick on cylinder side
*Automatic choke (10-12 HP)
*Shutdown solenoid carb
(10-12 HP)

Back to Top