Lotus Equipment Sales Ltd

Lotus Equipment Sales Ltd.
120, 5726 Burleigh Cr. S.E.
Calgary, Alberta, Canada
T2H 1Z8
Phone: (403)253-0822 1-800-661-0002
Fax: (403)253-8684 1-800-661-0007
Email: donnas@lotus-equip.com

Chain Saw Chain

Back to Carlton Main Page

Every Carlton Saw Chain is Built With These Important Features:
Nickel Alloy Steel All Carlton saw chains are fabricated from special alloy steel. This specially engineered steel adds toughness, abrasion resistance and ductility in all kinds of climates, from the heat of the tropics to the freezing cold of winter	Industrial Chrome Plating All Carlton saw chain cutters are plated with hard industrial chrome. This process yields superior edge holding qualities to other types of plating. In the field, Carlton saw chain stays sharp longer.	Exclusive Honed Sharp Cutters Another Carlton exclusive. Unlike the competition, every Carlton saw chain is sharpened after assembly to cut fast out of the box. You can feel the difference. There's no need to touch up a new Carlton saw chain.
Roto Blasting All Carlton saw chain cutters, drive links and bumper links are shot peened for increased tensile strength. A similar process is used on automotive leaf springs. Roto blasting makes Carlton parts tougher.	Hypodermic Lubrication All Carlton saw chain is injected at the rivet bearings with a hypoid lubricant to reduce bearing wear during "break in". Only Carlton pre-lubes each bearing during assembly for longer chain life in the field.	Carlton Quality Auditing Carlton Quality Auditors are as tough as the chains we build. They inspect all phases of the manufacturing process to some of the tightest tolerances in the industry.

A (3/8" Pitch) Chain Series

FEATURES:
High Profile Cutters
Chain ground after assembly
Hypodermic lubrication
Shot peened drive/bumper link
Nickel alloy steel
Professional style chain

BENEFITS:
Longer chain life
Better out of box sharpness
Less chain stretch
Better fatigue strength
Better impact resistance
Better performance