Lotus Equipment Sales Ltd

Lotus Equipment Sales Ltd.
120, 5726 Burleigh Cr. S.E.
Calgary, Alberta, Canada
T2H 1Z8
Phone: (403)253-0822 1-800-661-0002
Fax: (403)253-8684 1-800-661-0007
Email: info@lotus-equip.com

Lifts & Accessories

Handy Main Page

Lifts Accessories

Lifts

10738
Multi-Lift -Handy® - Electric

Save your back and be more productive with our Multi-Lift.
The Electric Multi-Lift can lift up to 300 lbs. and rotate 360 degrees. With our design, you can tackle multiple repair projects such as Push Lawnmowers, Appliances, Small Motors and Garden Equipment.

Five positive locking working positions.
30" x 36" heavy-duty steel table.
Includes nylon tie-down straps.
Adjustable wheel channel to avoid slippage.
Center opening of 12". Lowers to 5".
Raises up to 37-1/2".
1/3 HP electric motor

10740
Air Lift Handy® - Standard

The Handy Air lift is used in power sport shops around the world.
The Handy Air Lift has a lifting capacity of 1000 lbs. and an 80" x 24" deck, making it ideal for working on motorcycles, ATVs, snowmobiles, garden tractors, etc. It raises to a working height of 30" and lowers to 7" for easy loading. The lift is a solid steel fabrication and is powered by a pneumatic cylinder from your air source (90-100) psi. Can be used with or without accessories. W:24" x L:80". CE Approved.

10742
Electric Handy® Standard Lift

Convenient for use without an air compressor.
The Handy Electric Lift has a lifting capacity of 1000 lbs. and has a 80" x 24" work top, making it ideal for working on motorcycles, ATV's, snowmobiles, garden tractors etc. The lift is a solid steel fabrication.
Convenient for use without an air compressor. 115 volt 60 Hz. W:24: x H: 15". Made in U.S.A.

14279
Jak-Lift -360

For oil & tire changes and basic repairs.
Will accommodate motorcycles, ATVs and garden tractors with exposed frames.

Lifts 1200 lbs.
Two safety lock out positions - one at 11-3/4" and one at 18-1/2".
Four-ton hydraulic jack with foot pump.
Low 4-1/2" ground clearance.
Four locking swivel wheels.

14472
B.O.B. 1500 - Handy®

Longer, Wider & Taller for your Big Jobs!
The introduction of Handy’s B.O.B 1500 Air Lift solves numerous challenges in today’s professional workshop. The lift has an adjustable height from 10 to 40 inches; lifts 1500 pounds for the fully dressed motorcycles, trikes and quads; and has a drop-out for convenient tire changes. We also made the lift a full 7’ long and expended the width to 28”. To further customize the B.O.B. to your needs, you can add 12” side extensions, a 13” front extension, and a trike extension kit to the lift. Handy also has the CV-17 cycle vise with multiple mounting positions and an integrated, quick-release wheel stop.
Handy's B.O.B. 1500 is packed with features:

1,500 lb. safety rated lifting capacity.
40" maximum height.
Work surface of 84" x 28".
Drop out for tire changes.
11 gauge steel construction.
Air Source 90-100 psi.
Ramp length 31".
CE approved.

14691
Multi-Lift -Handy® Manual

Manual Multi-Lift with Brake Winch. Handle will not spin under load.
The Manual Multi-Lift can lift up to 300 lbs. and rotate 360 degrees. With our design, you can tackle multiple repair projects such as Push Lawnmowers, Appliances, Small Motors and Garden Equipment.
Five positive locking working positions. Work at any height.

30" x 36" heavy-duty steel table.
Includes nylon tie-down straps.
Adjustable wheel channel to avoid slippage.
Lowers to 5".
12" center opening.
Manual model has brake winch. Handle will not spin under load.
Raise up to 39".

15640
Italia 770 Motorcycle Lift

Hydraulic Motorcycle Lift.

Lifting capacity of 770 lbs.
Maximum height 40-1/2".
Minimum height 8".
Work Platform 78-1/2" x 23-1/2".
CE Approved.

Uses either the Item #14366 Hydraulic/Pneumatic Pump or the Item #14365 Foot Pump
Wheel Vise for this lift is #15644

15641
Italia 1100 Motorcycle Lift

Hydraulic Motorcycle Lift. Lifting capacity of 1100 lbs. Max. height 40-1/2". Minimum height 8". Work Platform 82-1/2" x 29-1/2". CE Approved. Uses either the 14366 Hydraulic/Pneumatic Pump or the Item #14365 Foot Pump.

Lifting capacity of 1100 lbs.
Maximum height 40-1/2".
Minimum height 8".
Work Platform 82-1/2" x 29-1/2".
CE Approved.

Uses either the Item #14366 Hydraulic/Pneumatic Pump or the Item #14365 Foot Pump
Wheel Vise for this lift is #15644

16000
S.A.M. 1000 Handy® Lift

For your longer bikes, with a drop out.
Handy’s S.A.M. 1000 is the same great lift as our standard Air Lift, with additional features of a dropout panel and 84” length for working on those longer motorcycles. S.A.M.’s specifications include a safety-rated 1000 lb capacity, 24” width, 30” maximum height, 7” minimum height, and weight of 330 lbs. We also offer several attachments to customize your S.A.M. 1000 Lift, such as a CV-17 Cycle Vise, 8” Side Extensions, 12” Side Extensions, 13” Front Extension, Lift Dolly and a Tool Tray. All Handy Lifts are made in the U.S.A.

Capacity: 1000 lbs.
Length: 7 ft. (84")
Width: 24"
Maximum height: 30"
Minimum height: 7"
Work surface: 84" x 24"
Air Source: 90-100 psi.
CE Approved.

20704
Hydraulic Air Lift - (Orange & Black Hydraulic Lift)

All of the best features you’ve always wanted in your motorcycle lift can be found in our new Hydraulic Lift.

This lift handles every production bike in the world with a lifting capacity of 1500 lbs.

Lift raises up to 48". Automated locking safety latch system with 10 safety stops. Lowers to 7-1/4" for easy loading.

The rear drop out is ideal for easy tire changing and the 18 “ front drop down give you easy access to the front wheel and fork. Raise the lift with the new hand held pendant control to a incredible height of 48”.

Self-storing drop-out back panel for rear wheel removal.

Our CV-17 Cycle Vise (Item # 14476) can be used with this lift.

Specifications

Length - 86-5/8"
Width - 29-1/2"
Height/max - 48"
Height/down - 7-3/4"
Weight (unboxed)- 600 lbs.
Capacity - 1500 lbs.
Rear Drop-out - 14-1/8"W x 23"L
Front Drop-leaf - 20-1/2" W x 15-3/8"L
Ramp - 17-1/2" W x 36"L
Tool Tray/Toe Guard - 14-3/4" W x 66"L
Power - Air: 100 psi

This lift is also available in other colors:

20713 - Gray

20714 - Silver

20707
Hydraulic Electric Lift 1650S

All of the best features you’ve always wanted in your motorcycle lift can be found in our new Hydraulic Lift.

This lift handles every production bike in the world with a lifting capacity of 1500 lbs.

Lift raises up to 48". Automated locking safety latch system with 10 safety stops. Lowers to 7-1/4" for easy loading.

Self-storing drop-out back panel for rear wheel removal. For extra workspace you can add our 12" Side Extensions (Item# 20728).

The CV-17 Cycle Vise (Item # 16588) can be used with this lift.

Specifications

Length - 86-5/8"
Width - 29-1/2"
Height/max - 48"
Height/down - 7-3/4"
Weight (unboxed)- 600 lbs.
Capacity - 1500 lbs.
Footprint: 30-1/4" x 84"L (114"L w/ramp)
Rear Drop-out - 14-1/8"W x 23"L
Front Drop-leaf - 20-1/2" W x 15-3/8"L
Ramp - 17-1/2" W x 36"L
Tool Tray/Toe Guard - 4-3/4" W x 66"L
Power - Electric Hydraulic, 120V 60 hz, single phase

This lift is also available in other custom colors:

#20708 - Silver

#20709 - Yellow

#20710 - Blue

#20711 - Green

#20712 - Red

#20707 - Gray (standard color)

Accessories
10728 Air Lift - Standard - 12" Side Extensions The perfect add-on for ATV's and big cruisers. Expands width of lift from 24" to 48" (2 ea.) Includes stabilizer & ramp extensions. Wt. 115 lbs.	10730 Air Lift - Standard 8" Side Extensions Ideal for garden tractors and extra workspace. Expands width of lift from 24" to 40" (2ea.). Ramp extensions included.
10732 Lift Dolly Our lifts are heavy so slide it around your shop easily. Use with our Standard Air Lift and our S.A.M. 1000 Lift	10737 Air Lift - Standard -Snowmobile Wing Kit Work more safely with our snowmobile wings. Dangling sled skis distort the load. Extended width is 50" Pipe included.
13007 Motocross Center Stand Lifts motocross bikes in a step. Overall weight: 11 lbs. Scissor lifting up to maximum height of 16". Zinc plated Steel tubular structure and rubber coated metal base.	14169 Air Lift - Standard Trike Extensions Used when lifting trikes. Ramp and pipe support extensions included. Extension width is 50-1/2" x 20". Extends lift to 82" Pipe support 51-5/8" long.
14292M Universal Adjustable Front Stand Made for your shop and bikers with more than one ride. Adjustable width from 7" to 10-1/4". Safe and easy way to change tires, tighten stems, clean your front wheels and prevent flat spots on your tires.	14365 Italia 770 - Italia 1100 Foot Pump Foot pump for Italia Lifts.
14366 Italia 1100 & Italia 770 - Hydraulic / Pnuematic Pump Pump for Italia lifts.	14473 B.O.B. 1500 - 12" Side Extensions The perfect add-on for ATV's and big cruisers. Expands width of lift from 28" to 52" (2 ea.). Includes stabilizer & ramp extensions.
14474 B.O.B. 1500 - 13" Front Extension If you need extra length when working on long bikes. Add this accessory and extend the B.O.B. 1500 lift top to 97"	14475 B.O.B. 1500 - Trike Extension Used when lifting trikes. Ramp and pipe support extensions included. Extension width is 52-1/4" x 24".
14476 CV-17 Cycle Vise For Standard Air Lift, S.A.M. 100 lift and B.O.B. 1500 lift. The essential lift accessory. Positions your cycle upright.	15566 Ramp End Extensions for Standard Air Lift, B.O.B. 1500, S.A.M. 1000 For loading low setting bikes. Extends lift ramp. Use with the B.O.B. 1500, Standard Air Lift or S.A.M. 1000. 20" x 11-3/8"
15644 Italia 770 & Italia 1100 -Wheel Vise Vise for lift	15833 Tie-Downs- Handy® Red - 1 Pair Secure your powersport equipment on our lifts with these Handy Tie-Down Straps 1" x 6' Motorcycle/ATV strap with soft tie assist strap attached. Maximum load of 1200 lbs. and a safe work load of 400 lbs. New patented design allows for a super tight hold, simply pull your strap end fairly tight and flip the TCS buckle over to tighten. Increase the stability of your project with our Lo-Boy Scissor Jack. Wider deck and rubber non-skid pad raises the front or rear of bikes and ATV's safely.
16002 S.A.M. 1000 - 12” Side Extensions For S.A.M. 1000 Lift. The perfect add-on for ATV's and big cruisers. Expands width of lift from 24" to 48". Includes stabilizer bar and ramp extensions.	16003 S.A.M. 1000 - 8" Side Extensions Side Extensions for the S.A.M. 1000 Expands width of lift from 24" to 40" (2 ea.) Ramp included.
16008 Engine Stand - Deluxe One mechanic can remove and install engines without damaging paint or chrome. *From cycle to work bench...* Holds all Harley Davison engines - Sportster, Twin Cam 88 & Evolution. Lifting capacity of 500 lbs. Adjustable height - maximum lifting height 52", minimum lift 39" from floor to journal. Length - 37". Width 19" front, 31" rear. 360 degrees rotation. Tilt head assembly 45 degree fore and aft Jack assembly - 5/8" Acme screw. Extendable legs. Swivel caster wheels with locks. 18" x 18" multi-position Tool Tray holds tools and parts. Also may position in front for oil drip tray.	16009 Rider's Crib Generous shelved storage area for helmet, boots and riding gear. Lockable doors for security. Six locking heavy-duty ball bearing slide drawers. Drop down side shelf offers workspace of 357 sq. inches. Durable powder coat paint. Heavy-duty 4" casters - 2 rigid and 2 locking swivel. Weight 319 lbs. Overall dimensions: 40"W X 21-1/2"D x 73"H. Top storage 39-1/2"W X 21"D X 39"H. Bottom unit - 40"W X 21"D X 29"H. Top Drawer 35-1/2"W X 19-1/2" D X 4"H. Three Drawers - 21"W X 219-1/2"D X 5-1/2"H. One drawer 11-1/2"W X 19-1/2"D X 5-1/2"H. One drawer 11-1/2"W X 19-1/2"D X 12 -1/2"H. Side Table 21" W X 17" D.
16010 Tool Tray for Handy Lifts *Our Tool Tray keeps your tools organized and handy.* *Fits all Handy Lift models.* Easy on/off clamp mechanism. Tray is black polyethylene with magnets. Tool Tray holder made out of 16-gauge steel. Seven compartments. Five tool compartments for your hand tools. Two compartments for fasteners. Weight 20 lbs.	16011 Air Lift and S.A.M. -13" Front Extension for Standard Air Lift and S.A.M. 1000 For the Standard Air Lift and S.A.M. 1000 Lift. Ideal for working on longer bikes. Extends Standard Air Lift top to 93". Extends S.A.M. 1000 lift top to 97" H: 3-3/4" x W:24-1/2" x L:24"
16018 Auxiliary Fuel Tank The Handy Auxiliary Fuel tank is indispensable when working on your motorcycle. When your gas tank is off you can still start *Auxiliary Fuel Tank* 1 liter capacity. Hose with on/off valve allows fuel to flow and connects to your motorcycle engine fuel line with hose barb connection. Wt. 2 lbs. Hang your Auxiliary Fuel Tank from our heavy duty Mechanic's Handy Pole Item #16615 or our Deluxe Mechanic's Handy Pole Item #16440	16019 Tire Pressure Gauge - Digital Correct Tire Pressure Improves Tire Life Keep tire pressure at manufactures recommended levels. Accurate tire pressures help improve fuel consumption. Give standard PSI readings. Quick, simple to use and very accurate. Complete with batteries. Simple to operate in 2 easy steps. Press the Power Button ON. Insert the pressure gauge onto the tire valve. NOW READ THE DIGITAL DISPLAY FOR THE EXACT TIRE PRESSURE! The average battery life is approximately 5 years (reading 4 times per day, 15 seconds per time). Specifications Accuracy - +/-1psi Pressure Range - 1-100 psi Energy Resource - 2 Batteries - Type LR-44 Utilization Temp. - 14 degrees to 100 degrees F (-10 degrees C to 37 degrees C) Display Method - Liquid Crystal Display
16173 Engine Stand - Benchtop Stand for HD Twin 88 Work on your HD Twin 88 with this benchtop stand	16176 Engine Stand - Benchtop Stand for HD Evolution Benchtop stand for working HD Evolution engine. *Use with our Item # 16008 Deluxe Engine Stand*
16257 Engine Stand Harley Kit (bracket arms and bench top stands) For Sportster, Twin Cam 88 and Evolution From cycle to workbench.... Optional Harley Kit for use with our Item #16008 Deluxe Engine Stand Kit includes: 1- Harley Twin 88 Benchtop Stand - Item #16173 1- Harley Evolution Benchtop Stand - Item # 16176 1- Harley Sport Engine Support Plate - Item # 16169 1 - Adapter sleeve Front and rear engine attachment arms 1- Quick release pin	16355 Covered Foot Pedal Covered Foot Pedal for Standard Air Lift, S.A.M. 1000 & B.O.B 1500 Lifts CE approved.
16386 Lawn & Garden Accessory Kit A "third hand" kit for handling your lawn and garden equipment Quick-change kit simplifies ordinary equipment maintenance. Works with any Handy Lift or our Handy Multi-Lift and most workbenches Kit includes: Chain saw attachment Engine attachment Weed trimmer attachment	16440 Auxiliary Fuel Tank Mechanics Deluxe Handy Pole *Works on all Handy Lifts!* Fast attach to sides or ends of our Handy Lifts. Adjustable height (base to hook - lowest height 48" - peak height 76"). Swivels and pivots for just the right angle. Also use for hanging: Trouble lights Cables Air Hoses *Auxiliary Fuel Tank is sold separately. Item # 16018*
16615 Auxiliary Fuel Tank - Mechanics Handy Pole Pole for hanging Auxiliary Fuel Tank (Item # 16018) Attach to side or end of our Handy Lifts. Not adjustable. Height: 43". Wt. 5 lbs. It can also be used for hanging: Trouble lights Cables Air hoses *Auxiliary Fuel Tank is sold separately. Item # 16018.*	17007 Tool Buddy Keep your tools organized with our Handy Tool Buddy Many storage options with large upper and lower divided compartments with sliding drawers and a locking lid to protect your tools. Main Features Foldaway lid with lock. Sliding drawer. Tool tray protected by fuel proof mats. Four castors: 2 fixed and 2 swiveling (one with brake).
17082 B.O.B 1500 - UV Front Extension Extension for Utility Vehicles Additional length for utility vehicles. Width 52-5/6" and 22" deep.	20728 12" Side Extensions for Hydraulic Lift Add more workspace! Ideal for extra workspace. Expands width of lift from 30-1/4" to 54-1/4" (2 ea.) Includes 4 wheel stops and ramp extensions.

Page Last Updated May 08, 2011