Lotus Equipment Sales Ltd.
120, 5726 Burleigh Cr. S.E.
Calgary, Alberta, Canada
T2H 1Z8
Phone: (403)253-0822   1-800-661-0002
Fax: (403)253-8684   1-800-661-0007
Email: donnas@lotus-equip.com

Back to Accessories Main Page

Front Shaft Drives

Drive Shafts      Grass Screens with Holes for Front Drives

FRONT DRIVES (DIMENSIONS IN INCHES)

Part Number A B C D E Hardware Required Drill & Tap Model*
41-144-01 2.81 1.56 0.75 .188 2.188 See Below - M8
52-144-19 4.66 2.53 1.0 .25 3.0 See Below 3/8-16 CH11-15, LH640-775, M10-20, TH16-18
235954 3.48 1.44 1.0 .25 3.0 See Below 3/8-16 CH11-15, LH640-775, M10-20, TH16-18
237350 4.66 2.41 1.125 - 3.0 See Below - CH11-15, LH640-775, M10-20, TH16-18
47-144-01 3.88 1.75 1.125 .25 3.0 See Below 7/16-20 CH11-15, M10-20, LH640-775, TH16-18
47-144-09 3.88 1.75 1.0 .25 3.0 See Below 7/16-20 CH11-15, LH640-775, M10-20, TH16-18
52-144-07 3.80 1.80 1.0 .25WD 3.0 See Below - CH11-15, LH640-775, M10-20, TH16-18
24-755-05 7.00 1.44 1.0 .25 3.0 See Below 3/8-16 CH18-26/730-750, LH640-775, TH16-18
24-755-06 7.00 1.76 1.0 .25 3.0 See Below 7/16-20 CH18-26/730-750, LH640-775, TH16-18
24-755-07 7.00 1.80 1.0 .25 3.0 See Below - CH18-26/730-750, LH640-775, TH16-18
24-755-08 7.00 2.53 1.0 .25 3.0 See Below 3/8-16 CH18-26/730-750, LH640-775, TH16-18
24-144-13 6.40 2.53 1.0 .25 3.0 See Below 3/8-16 CH18-26/730-750, LH640-775, TH16-18
24-144-16 5.35 2.53 1.0 .25 3.0 See Below - CH18-26/730-750, LH640-775, TH16-18
24-144-17 4.00 1.93 0.7** .188WD 3.0 See Below - CH18-26/730-750, LH640-775, TH16-18
24-144-22 6.20 2.60 1.125 .25 3.0 See Below - CH18-26/730-750, LH640-775, TH16-18
24-144-23 4.84 2.82 1.0 .25 3.0 See Below 3/8-16 CH18-26/730-750, LH640-775, TH16-18
24-144-25 5.51 2.17 1.0 .25 3.0 See Below - CH18-26/730-750, LH640-775, TH16-18
24-144-26 3.94 1.06 0.625 .187 3.0 See Below - CH18-26/730-750, LH640-775, TH16-18
24-144-32 8.23 3.79 1.0 .25 3.0 See Below M12 x 1.75 CH18-26/730-750, LH640-775, TH16-18
24-144-47 4.50 1.50 1.125 .25 3.0 See Below 7/16-20 CH18-26/730-750, LH640-775, TH16-18
24-144-51 5.98 2.36 1.0 .25 3.0 See Below 7/16-20 CH18-26/730-750, LH640-775, TH16-18
24-144-53 4.00 1.36 1.0 .25 3.0 See Below 3/8-16 CH18-26/730-750, LH640-775, TH16-18
28-144-05 5.28 3.07 1.125 .25 3.0 See Below - CH18-26/730-750, LH640-775, TH16-18
66-144-04 3.87 2.37 1.125 .25 3.0 See Below - CH18-26/730-750, LH640-775, TH16-18
48-144-13 4.50 3.22 1.125 .25 3.625 See Below 7/16-20 K582
48-144-06 3.875 2.69 1.25*** .156 3.625 See Below 5/16-24 K582
277637 4.50 3.22 1.25 .25 3.625 See Below - K582
62-144-07 4.54 2.30 1.125 .25 3.0 See Below 7/16-20 CH940-1000
62-144-09 5.33 2.00 1.125 .25 3.0 See Below 7/16-20 CH940-1000
24-144-55 4.50 1.50 1.0 .25 3.0 See Below 3/8-16 CH18-26/730-750

*Consult factory on: CH11-15 since flywheel holes may vary and spec may not accept front drive: LH640-775 to verify front loading.
**Threaded end (3/4"-16 UNF 2A
WD = Woodruff Key
Required Hardware:
M8:  (3) X-132-4 Screw.
M10-20:  (4) X-159-2 Screw.
TH16-18:  (4) M-839025 Screw.
CH11-15:  (2) X-22-2 Washer, (2) M-1053030 Screw.
CH18-26/730-750:  (4) M-839025 Screw (Included in -755 kits)
LH640-775:  (4) M-839025 Screw.
CH940-1000:  (4) M-839035 Screw.

 

GRASS SCREENS WITH HOLE FOR FRONT DRIVES

                                    

Some Front Drives Require:
LH640-775:  Also order 66 096 18 Flywheel Cover w/hole for front drive or instruction sheet TT-5081 for a template to cut the hole in your existing flywheel cover.
All Other Models:  Also order Grass Screen w/hole for front drive per table below.  If changing from plastic screen to metal screen, also order blower housing.  Contact customer service at factory for correct blower housing.
Part Number Type Hole Dia. (In.) Hardware Required to Attach New Screen Model
41-162-11 Plastic 2.62 None M8
47-162-18 Plastic 2.27 (4) M-639016 Screw, (4) 12-112-01 Spacer M10-16
25-162-03 Plastic 2.27 None M18-20
48-162-02 Metal 2.50 None K582
12-162-03 Plastic 2.56 None CH11-15
24-162-16 Plastic 1.42 None CH18-22
24-162-18 Plastic, Hi-Eff. 1.77 None CH18-26/730-750, TH16-18
24-162-22 Metal*, Flat 1.57 None CH18-26/730-750, TH16-18
24-162-23 Metal*, Flat 2.95 None CH18-26/730-750, TH16-18
24-162-24 Metal*, Flat 2.46 None CH18-26/730-750, TH16-18
62-162-09 Metal 1.81 None CH940-1000
*Flat design.  If replacing older "crowned" version, also order 54-755-10 Hardware Kit

Back to Top

Page Last Updated  December 16, 2008