Lotus Equipment Sales Ltd.
120, 5726 Burleigh Cr. S.E.
Calgary, Alberta, Canada
T2H 1Z8
Phone: (403)253-0822   1-800-661-0002
Fax: (403)253-8684   1-800-661-0007
Email: lotus@knight.ab.ca

Clutches

Home

Centrifugal 
Chain Drive

Centrifugal
Pulley 

Torque
Converters 

Golf Cart
Clutches
Reduction
Gearboxes		 SCD-1
Self Contained Differential Kit		 Go-Kart/Mini Bike
Accessories		 Torque Converter
Belt Specifications		 Torque Converter
Spring & Roller Kits

Torque Converters

20 Series     30 Series     TAV2-30     340 Series     40 Series     Magnum 44     500 Series

Recommended Belt Specifications     Spring & Roller Kits     Dry FilmLubricant     Jackshafts & Replacement Sprockets

Why Use A Comet Torque Converter System

Since these devices consist of a "belt" and two "variable pitch pulleys" all working together harmoniously, serving as both clutch AND transmission, we often call them "variable speed drive SYSTEMS."  Weather-proof, completely mechanical and occupying minimum space, they can operate mounted in any position and are adaptable to a wide variety of applications, both stationary and vehicular.  Each COMET system is fully automatic and can be used anywhere that control by engine throttle is desirable.  There are no gears, no complicated controls or levers and neither manual shifting nor clutching is involved in these systems.  Utter simplicity makes both cost of this equipment and its installation modest and also reduces future maintenance to a negligible minimum without compromise of performance of versatility ... unique design of the "movable face" in each "driver" and "driven" member causes automatic, infinite variation and thus smooth shifting action between the system's low and high range in immediate response to changing load and/or travel conditions ... with constant optimum ratio between engine and drive wheel thus develops.  Since ratio selection and "down-shifting" is automatic, braking and vehicle control are enhanced.  Even engine and drive train component life (sprocket, chain, bearings, etc.) is extended since shifting is smooth and not subject to the hazards of manual control.

Model 20 Series (Symmetrical)
Recommended HP:Max:   
8 HP - 2 Cycle
8 HP - 4 Cycle

Drive Clutch Engagement Range:   
Min:  1200 RPM   
Max:  3100 RPM

 Drive Belt:  
3/4" Top Width Symmetrical Type

 

20 Series Drivers
Part Number

Description

 List Price

203812A

 20 Series Driver, 3/4" Bore, 3/16" Key

Please Call

203543A

 20 Series Driver, 1" Bore, 1/4" Key

Please Call

Parts List For 203812A

                                                                                                                                                        
Item # Part Number

Description

 List Price
1 202092A Bolt 3/8-24 x 1 1/2" (Use on 203812A) (1) Please Call
2 200841A Washer, Steel 3/8" I.D. - (Use on 203812A (1) Please Call
3 202090A Drum (1) Please Call
4 200376A Hub Driver 3/4" I.D. (3/16 Key) (1) Please Call
5 200344A Shoe Driver Assembly (1) (Zinc weights engagement 2200 RPM) Please Call
7 11188A Spring, Garter blue (2) Please Call
8 200351A Face, Movable w/Splined Hub (1) Please Call
9 200836A Washer, Belt Spacer  (2) (Not required on units manufactured after March 1994) Please Call
10 200349A Bushing, Bronze (1) Please Call
11 TC-884 Series (See Belt Specs.) (1) Please Call
12 202064A Fixed Sheave 3/4" Bore (3/16 Key) (1) Please Call
13 200702A Washer Spg Loc 3/8 (1) Please Call

Parts List For 203543A

Item # Part Number

Description

 List Price
1 202092A Bolt, 3/8-24 x 1 1/2" (1) 

Please Call
2 202429A Washer, Pilot (1) Please Call

3

 202427A Drum (1) Please Call
4 203641A Sleeve, Splined (1/4 Key) (1) Please Call
5 200344A Shoe Ass'y Driver (1) Please Call
6 203637A Face,  Movable w/Splined Hub (1) Please Call
7 203639A Face, Fixed (1/4 Key) (1) Please Call
8 200702A Washer, Spg Loc (1) Please Call
20 Series Driven
Part Number Description List Price
20 Series Driven Units
3/4" Top Width Belt
217772A 5/8" Bore - 6" Diameter Driven Please Call
217776A 3/4" Bore - 6" Diameter Driven Please Call
217774A 5/8" Bore - 7" Diameter Driven Please Call
217775A 3/4" Bore - 7" Diameter Driven Please Call
Parts List (6" Driven Units) 21D6

Item # Part Number

Description

 List Price
1 217765A Face, Fixed w/Post 5/8 Bore (3/16 Keyway) W/Ret. Ring (1)

Please Call
1 217767A Face, Fixed w/Post 3/4 Bore (3/16 Keyway) W/Ret. Ring  (1) Please Call
2 203942A Bushing (1) Please Call
3 215645A Face, Movable w/Cam (1) Please Call
4 215698A Spring, Coil, Blue (1) Please Call
5 215650A Cam, Fixed 20 degrees (1) Please Call
6 204714A Ring, Retaining (1) Please Call
7 204332A Button, Insert (6) Please Call
Parts List (7" Driven Units) 21D7
Item # Part Number

Description

 List Price
1 217764A Face, Fixed w/Post 5/8" Bore (3/16 Keyway) W/ Ret. Ring (1)

Please Call
1 217766A Face, Fixed w/Post 3/4" Bore (3/16 Keyway) W/Ret. Ring  (1) Please Call
2 203942A Bushing (1) Please Call
3 215646A Face, Movable w/Cam (1) Please Call
4 215698A Spring, Coil, Blue (1) Please Call
5 215650A Cam, Fixed 20 degrees (1) Please Call
6 204714A Ring, Retaining (1) Please Call
7 204332A Button, Insert (6) Please Call

20 Series Recommended Belt Specifications
*20 Series *3/4" Top Width *30 Degree Symmetric (15 + 15)
*20C & 21D-6" & 21D-7" *.40 Thick *Kevlar Type

C.D. Setting

Part Number

# On Belt

6" Diameter Driven

7" Diameter Driven

Belt O.C.

Fractional Equiv.

List Price
203578A 884-70 6-15/16"  -  7" No Fit 27.36" 27-23/64" Please Call
203579A 884-75 7-1/8"  -  7-3/16" 6-1/4"  -  6-5/16" 28.32" 28-21/64 Please Call
203580A 884-80 7-9/16"  -  7-5/8" 6-13/16"  -  6-7/8" 29.28" 29-9/32" Please Call
203581A 884-85 8-3/16"  -  8-1/4" 7-5/16"  -  7-3/8" 30.25" 30-1/4" Please Call
203582A 884-90 8-11/16"  -  8-3/4" 7-3/4"  -  7-13/16" 31.23" 31-15/64" Please Call
203583A 884-95 9-3/16"  -  9-1/4" 8-5/16"  -  8-3/8" 32.20" 32-13/64" Please Call
203584A 884-100 9-5/8"  -  9-11/16" 8-3/4"  -  8-13/16" 33.18" 33-11/64" Please Call
203585A 884-105 9-15/16"  -  10" 9-13/16"  -  9-1/4" 33.78" 33-25/32" Please Call
203586A 884-110 10-3/4"  -  10-13/16" 9-13/16"  -  9-7/8" 35.14" 35-9/64" Please Call
203587A 884-120 11-11/16"  -  11-3/4" 10-15/16"  -  11" 37.11" 37-7/64" Please Call
203588A 884-130 13-1/16"  -  13-1/8" 12-1/8"  -  12-3/16" 39.77" 39-25/32" Please Call

Model 30 Series (Asymmetrical)
Recommended HP:Max:   
8 HP - 2 Cycle
8 HP - 4 Cycle

Drive Clutch Engagement Range:   
Min:  1200 RPM   
Max:  3100 RPM

 Drive Belt:  
3/4" Top Width Asymmetrical Type

30 Series Drivers
Part Number Description List Price

203814A

 30 Series Driver, 3/4" Bore, 3/16" Key

Please Call

203603A

 30 Series Driver, 1" Bore, 1/4" Key

Please Call
Parts List For 203814A

Item # Part Number

Description

 List Price
1 202092A Bolt 3/8-24 x 1 1/2" (Use on 203814A) (1)

Please Call
2 200841A Washer, Steel 3/8" I.D. - (Use on 203814A) (1) Please Call
3 202090A Drum (1) Please Call
4 200376A Hub Driver 3/4" I.D. (3/16 Key) (1) Please Call
5 200344A Shoe Driver Assembly (1) (Zinc weights engagement 2200 RPM)  Please Call
7 011188A Spring, Garter blue (2) Please Call
8 200410A Face, Movable w/Splined Hub (1) Please Call
9 200836A Washer, Belt Spacer (2) (Not required on units manufactured after March 1994)  Please Call
10 200349A Bushing, Bronze (1) Please Call
11 TC994 Series (See Belt Specs.) (1) Please Call
12 202066A Fixed Sheave 3/4" Bore (3/16 Key) (1) Please Call
13 200702A Washer Spg Loc  (1)

Please Call
Parts List For 203603A

Item # Part Number

Description

 List Price
1 202092A Bolt, 3/8-24 x 1-1/2"  (1)

Please Call
2 202429A Washer, Pilot  (1) Please Call
3 202427A Drum  (1) Please Call
4 203641A Sleeve, Splined (1/4" Key)  (1) Please Call
5 200344A Shoe Ass'y Driver  (1) Please Call
6 203515A Sheave, Movable w/Splined Hub  (1) Please Call
7 206633A Sheave, Fixed & Hub (1/4" Key)  (1) Please Call
8 200702A Washer, Spg Loc  (1) Please Call
30 Series Driven
Part Number Description List Price
30 Series Driven Units
3/4" Top Width Belt
217610A 5/8" Bore - 6" Diameter Driven Please Call
217779A 3/4" Bore - 6" Diameter Driven Please Call
217611A 5/8" Bore - 7" Diameter Driven Please Call
217778A 3/4" Bore - 7" Diameter Driven Please Call
Parts List (6" Driven Units) 31D6

Item # Part Number Description List Price
1 217612A Face, fixed w/Post 5/8" Bore (3/16" Keyway) w/Ret. Ring  (1) Please Call
1 217769A Face, fixed w/Post 3/4" Bore (3/16" Keyway) w/Ret. Ring  (1) Please Call
2 203942A Bushing  (1) Please Call
3 215647A Face, Movable w/Cam  (1) Please Call
4 215699A Spring, Coil, Green  (1) Please Call
5 215650A Cam, Fixed 20 Degree  (1) Please Call
6 204714A Ring, Retaining  (1) Please Call
7 204332A Button, Insert (6) Please Call
Parts List (7" Driven Units) 31D7
Item # Part Number Description List Price
1 217613A Face, fixed w/Post 5/8" Bore (3/16" Keyway) w/Ret. Ring  (1)

Please Call
1 217768A Face, fixed w/Post 3/4" Bore (3/16" Keyway) w/Ret. Ring  (1) Please Call
2 203942A Bushing  (1) Please Call
3 215648A Face, Movable w/Cam  (1) Please Call
4 215699A Spring, Coil, Green  (1) Please Call
5 215650A Cam, Fixed 20 Degree  (1) Please Call
6 204714A Ring, Retaining  (1) Please Call
7 204332A Button, Insert (6) Please Call

Recommended Belt Specifications 
*30 Series *3/4" Top Width *20-1/2 Degree Asymmetrical
*30D & 31D-6" & 31D-7" *.40 Thick *Kevlar Type
 

C.D. Setting

      

Part Number

6" Diameter Driven

7" Diameter Driven

Belt O.C.

Fractional Equiv.

List Price
203589A 6-5/8"  -  6-11/16" No Fit 27.03" 27-1/32" Please Call
217248A 6-5/8"  -  7" No Fit 27.36" 27-23/64" Please Call
203590A 7-1/8"  -  7-3/16" 6-1/4"  -  6-5/16" 28.32" 28-21/64 Please Call
203591A 7-9/16"  -  7-5/8" 6-13/16"  -  6-7/8" 29.28" 29-9/32" Please Call
203592A 8-3/16"  -  8-1/4" 7-5/16"  -  7-3/8" 30.25" 30-1/4" Please Call
203593A 8-11/16"  -  8-3/4" 7-3/4"  -  7-13/16" 31.23" 31-15/64" Please Call
203594A 9-3/16"  -  9-1/4" 8-5/16"  -  8-3/8" 32.20" 32-13/64" Please Call
203595A 9-5/8"  -  9-11/16" 8-3/4"  -  8-13/16" 33.18" 33-11/64" Please Call
203596A 9-15/16"  -  10" 9-13/16"  -  9-1/4" 33.78" 33-25/32" Please Call
203597A 10-3/4"  -  10-13/16" 9-13/16"  -  9-7/8" 35.14" 35-9/64" Please Call
203598A 11-11/16"  -  11-3/4" 10-15/16"  -  10-15/16" 37.11" 37-7/64" Please Call
203599A 13-1/16"  -  13-1/8" 12-1/8"  -  12-3/16" 39.77 39-25/32" Please Call

Always run the 2-1/2 Degree side nearest the engine 
(the 2-1/2 Degree side appears nearly flat and must be mated to the like appearing sheave half)

 

TAV2-30 Series Torq-A-Verter

                                      

   
Recommended HP:Max:   
8 HP - 2 Cycle
8 HP - 4 Cycle

Drive Clutch Engagement:  
2200 RPM   

 Drive Belt:  
3/4" Top Width Asymmetrical Type

Part Number Model # Description List Price
218352A TAV2 30-75 35P 12T 3/4" Bore

Please Call
218353A TAV2 30-75 40/41P 10T 3/4" Bore Please Call
218354A TAV2 30-100 35P 12T 1" Bore Please Call
218355A TAV2 30-100 40/41P 10T 1" Bore Please Call
Parts List For TAV2 30

Item # Part Number Description List Price
203814A 3/4" Bore Replacement Driver Unit (CAT30-75) Please Call
203603A 1" Bore Replacement Driver Unit (30C-100) Please Call
217610A 5/8" Bore Replacement Driven Unit (31D-62) Please Call
1 215732A 5/16" - 24 x 2" MTG Bolt TAV2-75 (1) Please Call
1 205384A 3/8" - 24 x 2" MTG Bolt TAV2-100 (1) Please Call
2 200701A 5/16" Lock Washer  (1) Please Call
3 202429A 3/8" ID Pilot Washer TAV2-100 (1) Please Call
3 200840A 5/16" ID Pilot Washer TAV2-75 (1) Please Call
The above hardware is included to mount your drive clutch to your engine.  It is important that you use the correct bolt and washer to fit your particular engine.
*4 202090A Drum Driver TAV2-75 (1) Please Call
*4 202427A Drum Driver TAV2-100 (1) Please Call
*5 200376A Hub Driver TAV2-75 (1) Please Call
*5 203641A Hub Driver TAV2-100 (1) Please Call
*6 200344A Driver Weight Assy w/Springs (1) Please Call
**6A 011188A Blue Garter Spring, Set of 2 (1) Please Call
7 200410A Sheave Movable Half w/Hub 3/4" Bore (1) Please Call
7 203515A Sheave Movable Half w/Hub 1" Bore (1) Please Call
8 200349A Bushing Bronze (Not used on TAV2-100) (1) Please Call
9 203589A 7" Belt Asymmetric (1) Please Call
10 202066A Sheave Stationary 2 1/2 3/4" Bore (1) Please Call
10 206633A Sheave Stationary 2 1/2 1" Bore (1) Please Call
11 200389A Spacer 3/4" ID (1) Please Call
11 202877A Spacer 1" ID (1) Please Call
12 203189A Jam Nut 5/8 - 18 x 3/8" (1) Please Call
14 204714A Ring Retaining (1) Please Call
15 215650A Cam Fixed (1) Please Call
16 215699A Spring Green (1) Please Call
17 215647A Face Movable w/Cam (1) Please Call
17A 204332A Button Insert (6) Please Call
18 203942A Bushing (1) Please Call
19 217612A Face Fixed w/Post 5/8" Bore (1) Please Call
20 209831A Key 3/16" Sq. x 2-1/4" (1) Please Call
21 011059A Key 3/16" Sq. x 9/16" (1) Please Call
22 212225A 5/8" Dia. Jackshaft 6-3/8" Long (1) Please Call
23 200834A Washer 5/8" ID x 1" OD (1) Please Call
24 200379A Sprocket 12T 35P (1) Please Call
24 202168A Sprocket 10T 40/41P (1) Please Call
25 215558A Ball Bearing (2) Please Call
26 203187A Spacer 5/8" x 7/8" x 1" (1) Please Call
27 212227A Ring Retaining (1) Please Call
28 218525A Mounting Bracket w/Bearings and Spacer (1) Please Call
29 217867A Hex HD Cap Screw 5/16-24 x 1" (4) Please Call
30 200701A Lock Washer 5/16" (4) Please Call
31 218351A Shroud Plastic w/Decals (1) Please Call
32 214146A Screw THD FRM 1/4-20 x 1/2 (4) Please Call
33 218513A Decal (1) Please Call
34 218514A Decal (1) Please Call

*Note:  Driver drum and hub must be well aligned and torqued down tightly.
**To assure proper balance the springs should be replaced in pairs or the entire weight assembly should be replaced
Spring Engagement Chart For 20 & 30 Series

Part Number

 Colour RPM Using Zinc Weight
(#202933A) (Standard)
320 Grams 		 RPM Using Alum. Die Cast Weight
(#202931A) 
146.8 Grams 		 RPM Using Mod. Alum.  Weight
(#216177A) 
90.0 Grams 		 List Price

 
11184A Orange 1500/1450 2350/2100 2500 Please Call
11186A Pink 1800/1600 2800/2500 3100 Please Call
11188A Blue (Std.) 2200 3300 3700 Please Call
11189A Black 1400/1200 2100/1800 2300 Please Call
11190A White 3100/2800 4000 4500 Please Call
216111A Yellow/Blue 3300 4200 4700 Please Call
216115A Blue/Silver 3600 4600 5300 Please Call
Driven Springs
216095A Orange Torsion Spring For 20 Series Please Call
216168A Yellow Torsion Spring For 30 Series Please Call
215272A Gold Compression Spring For 20 & 30 Series Please Call

 

340 Series Torque Converter (Symmetrical)
JR. Dragster, Go Karts, Mini Bikes

340 Series Driver
Recommended HP:Max:   
8 HP - 2 Cycle
8 HP - 4 Cycle

Engagement RPM (4-Cycke):  See Engagement Chart
Driving Ratio: 2.5:1 at Engagement up to 0.8:1 overall ratio 3.16:1
Maximum Speed:  8500 r.p.m.  

 Drive Belt:  
3/4" Top Width Symmetrical Type

Part Number Description List Price
302377A 340 Series Driver 3/4" Bore, 3/16 Keyway 

Please Call
Parts List For 340 Series Driver
Item # Part Number Description List Price
1 302369A Fixed Face & Post 5/8" Bore (1) Please Call
1 302370A Fixed Face & Post 3/4" Bore (1) Please Call
2 301175A Idler Bushing (1) Please Call
3 300179A Splined Washer (1) Please Call
4 302373A Spline Liner (6) Please Call
5 302362A Movable Face (1) Please Call
6 See Engagement Chart R.H. Spring (3) Please Call
8 See Kit Bushing Spring (6) Please Call
9 See Kit Bushing (6) Please Call
10 See Engagement Chart Roller Kit (3) Please Call
11 See Kit Pivot Pin (3) Please Call
12 See Kit Clamp, Pivot Pin (3) Please Call
13 See Kit Lock Plate (3) Please Call
14 See Kit Screw (3) Please Call
15 300876A Retractor (1) Please Call
16 302383A Ramp Plate (1) Please Call
17 302365A Retainer w/Retainer Spacer (1) Please Call
18 300183A Lock Washer (1) Please Call
19 300090A Spacer, Thrust (1) Please Call
20 302361A Retainer Spacer (1) Please Call
21 302359A Shim (4) Please Call
Kit 302203A Pivot Pin Kit, (Includes Items 8, 9, 11, 12, 13, 14) Please Call
Kit 302253A Springs, Bushings (Includes Items 8, 9, 13) Please Call
Belts Please Call
340 Series Driven
Part Number Description List Price
302344A 340 Series Driven 5/8" Bore, 3/16 Keyway, 6" Diameter  Please Call
302345A 340 Series Driven 3/4" Bore, 3/16 Keyway, 6" Diameter   Please Call
Parts List For 340 Series Driven

Item # Part Number Description List Price
1 300930A Fixed Face and Post w/Bushing, 5/8" Bore (1)

Please Call
1 300847A Fixed Face and Post w/Bushing, 3/4" Bore (1) Please Call
2 300240A Bushing (1) Please Call
3 302346A Moveable Face (1) Please Call
4 300234A Spring, Black (1) Please Call
5 302364A Cam w/Buttons (1) Please Call
6 300172A Buttons (3) Please Call
7 214843A Set Screw, 1/4-20 x 1/2 (3) Please Call
8 302347A Spacer (1) Please Call

Roller Kits for 340 Series
Spring Kits Black
w/Alum. Bushing
w/Red Alum. Rivet
301031A
27 Grams		 Black
w/Steel Bushing
w/Plain Steel Rivet
300114A
35 Grams		 Pink
w/Steel Bushing
w/Plain Steel Rivet
300127A
41 Grams		 Orange
w/Steel Bushing
w/Plain Steel Rivet
300126A
46 Grams		 Green
w/Steel Bushing
w/Plain Steel Rivet
301330A
55 Grams		 List Price
Part Number Colour
302221A Black 2800 2300 2200 1900 1700 Please Call
302222A Pink 4000 3300 3200 2700 2400 Please Call
302223A Gold 4300 3500 3400 2900 2600 Please Call
302225A Purple 4900 4000 3900 3400 3000 Please Call
302224A Blue 5600 4600 4500 3800 3500 Please Call
  List Price Please Call Please Call Please Call Please Call Please Call  

Model 340 Driver / 340 Driven
Recommended Belt Specifications
Part Number Center Distance Setting Approx. Belt O.C. List Price
203578A 6-15/16" - 7" 27.36" Please Call
203579A 7-1/8" - 7-3/16" 28.32" Please Call
203580A 7-9/16" - 7-5/8" 29.28" Please Call
203581A 8-3/16" - 8-1/4" 30.25" Please Call
203582A 8-11/16" - 8-3/4" 31.23" Please Call
203583A 9-3/16" - 9-1/4" 32.20" Please Call
203584A 9-5/8" - 9-11/16" 33.18" Please Call
203585A 9-15/16" - 10" 33.78" Please Call
203586A 10-3/4" - 10-13/16" 35.14" Please Call
203587A 11-11/16" - 11-3/4" 37.11" Please Call
203588A 13-1/16" - 13-1/8" 39.77" Please Call

 

40 Series Torque Converter (Symmetrical)
Recommended HP:   
8 HP - Min. 4 Cycle
18 HP - Max. 4 Cycle

Drive Clutch Engagement Range:
Min: 1600   Max: 3100

Drive Belt:  
7/8" Top Width Symmetrical Type

40 Series Driver
Part Number Description List Price
203015A 40C Series Driver 1" Bore, 1/4" Key  Please Call
Parts List For 40 Series Driver

Item # Part Number Description List Price
1 203021A Cover & Drive Plate (1)

Please Call
2 203648A Cam, Roller, Std. (3) Please Call
3 203044A Clip, Spring (3) Please Call
4 203043A Spring, Extension, Yellow Standard (3) Please Call
5 203022A Face, Movable & Hub (1) Please Call
6 203031A Bushing, Guide (2) Please Call
7 203039A Spring, Compression (1) Please Call
8 203023A Fixed Face and Post, 1" Bore 1/4" Key (1) Please Call
8 203024A Fixed Face and Post, 7/8" Bore, 1/4" Key (1) Please Call
Belts Please Call
40 Series Driven
Part Number Description List Price
209151A 40D Series Driven 7-1/2" Diameter, 5/8" Bore, 3/16" Keyway 

Please Call
209133A 40D Series Driven 7-1/2" Diameter, 3/4" Bore, 3/16" Keyway Please Call
209139A 40D Series Driven 7-1/2" Diameter, 7/8" Bore, 3/16" Key Please Call
Parts List For 40 Series Driven

Item # Part Number Description Parts Used On List Price
1 203159A Ring, Retaining All 40D

Please Call
2 205208A Washer, Thrust All 40D Please Call
3 209115A Cam, Fixed All 40D Please Call
4 203130A Spring, Red All 40D Please Call
5 209128A Movable Face and Cam with Bearing All 40D Please Call
6 203097A Spacer All 40D Please Call
7 209166A Key, 3/16" Sq. x 1/2 209151A-209133A Please Call
8 209150A Fixed Face & Post 5/8" Bore x 3/16" Keyway 209151A Please Call
8 209132A Fixed Face & Post 3/4" Bore x 3/16" Keyway 209133A Please Call
8 209138A Fixed Face & Post 7/8" Bore x 3/16" Key 209139A Please Call
9 206458A Button (3) All 40D Please Call

 

<

Magnum 44 Continuously Variable Transmission (Symmetrical)
Recommended HP:   
18 HP - Max. 4 Cycle

Drive Clutch Engagement Range:
Clutch Set Up at 1900 RPM 

Drive Belt:  
7/8" Top Width Symmetrical Type

Magnum 44C Series Driver
Part Number Description